Emitor Satlook Color HD

SKU: 9665

Product Resources:

 Satlook Color HD - Leaflet   Satlook Color HD - Manual 

Product Description:

The SATLOOK HD COLOR is a swedish made SAT-TV instrument and spectrum-analyzer. The unit is made for exact alignment and adjustment of satellite-dishes. It is intended for professional use when high accuracy and precise information are needed. It´s easily operated without a lot of unnecessary buttons and knobs. The basic functions are easy to get a hold on and takes only minutes to learn. The SAT-part also has very high resolution and accuracy. It presents measured data ±1½ dB (at 20° C). The Sat-TV spectrum can be expanded (zoom in) for correct adjustment of the polarisation (“cross-polarisation”). The SAT- part presents, under one of the sub menus, digital information like BER (bit error rate), constellation-diagram (QPSK and 8PSK) and S/N (signal/noise ratio). The NIT function of the SAT-part can identify the variousTV-satellites by reading out the NIT in the Bitstream (NIT = Network Information Table). The NIT also contains info about the transponders TV and Radio-channels. The unit has a built in DVBS-receiver which can store up to 100 Free To Air channels in a favourite channel-list. SATLOOK HD COLOR can handle a lot of memory-positions and both spectrum-pictures and certain frequencies can be saved (both analog and digital transponders). The power of the instrument is supplied by a built in and rechargeable battery. The instrument is provided with a 5” color 16:9 LCD-monitor. Menus/help-displays are shown on the LCD screen (64x128) beside the monitor.

Features:

  • MER readout
  • Spectrum-analyzer 950-2150MHz
  • DVB/S S/2 -receiver 920-2150MHz
  • Super bright 5” 16:9 TFT-LCD color display
  • Automatic Satellite identification
  • Readout of NIT- gives SATID and TV/Radio-channel info
  • Digital BER and S/N-ratio (DVB-S, S/2)
  • QPSK and 8PSK constellation diagram
  • DVB-S (Free to Air) and SAT-analog TV-picture
  • LNB voltage 13/18V, 22KHztone switch
  • DiSEqC according to level 1.0, 1.1 and 1.2
  • SatCr-control (UniCable)
  • Favourite channel list (100 channels) for FTA DVB-S
  • Lots of memory positionsforspectrum pictures
  • RS232 for PC-connection (up/download)
  • Rechargeable Li-Ion battery

Technical specification:

  • Input frequency: 920-2150MHz
  • Sat-TV min level in: About 35 dBuV (noise)
  • Sat-TV max level in: About 90 dBuV
  • Sat-TV attenuation: 15 dB attenuator on/off
  • Display of signal level (analog): dB on LCD/monitor. Pitch-tone.
  • Sat-TV accuracy: ±1½ dB (at +20° C)
  • DVB-S S/2 Digital display of signal level: S/N (signal/noise-ratio) BER (bit error rate) Constellation (QPSK and 8PSK)
  • Satellite-indentification: Yes, by reading out the NIT in the Bitstream. Info about the TV and Radio channels
  • TV standard: MultiTV/ (PAL, NTSC, SECAM)
  • KU- C-band: Yes, selectable
  • Input impedance: 75 Ohm, BNC-con
  • Picture-screen: 5” 16:9 TFT-LCD monitor
  • Menus: On LCD 64x128
  • Memory: -Lots of spectrum pictures can be stored with name. Stored spectrum can be mixed for easy identification of satellite. -“Maxhold”-function
  • Favourite channels: Both analog and digital frequencies can be stored (with name). 100 DVB-S Free to Air channels can be stored in a favourite channel-list
  • PC-connection: RS232-output and PC-software
  • Sat-TV power out: Yes, 13-18V
  • Sat-TV control: 22 kHz, DiSEqC SatCr (UniCable)
  • DiSEqC: Yes, all 1.0 and 1.1. 1.2,Toneburst on/off
  • DiSEqC actuator: Built in positioner for DiSEqC 1.2
  • Battery: Rechargable 12v, 3.5 amp/hour
  • Weight: About 4 kg incl. battery
  • Accessories: Nylon carrying-case. Power-supply of 220v/13.5v, 1.7amp. Car-charger, F-adapters