Emitor Satlook Color HD

SKU: 9665

Description:

The SATLOOK HD COLOR is a swedish made SAT-TV instrument and spectrum-analyzer. The unit is made for exact alignment and adjustment of satellite-dishes. It is intended for professional use when high accuracy and precise information are needed. It´s easily operated without a lot of unnecessary buttons and knobs. The basic functions are easy to get a hold on and takes only minutes to learn. The SAT-part also has very high resolution and accuracy. It presents measured data ±1½ dB (at 20° C). The Sat-TV spectrum can be expanded (zoom in) for correct adjustment of the polarisation (“cross-polarisation”). The SAT- part presents, under one of the sub menus, digital information like BER (bit error rate), constellation-diagram (QPSK and 8PSK) and S/N (signal/noise ratio). The NIT function of the SAT-part can identify the variousTV-satellites by reading out the NIT in the Bitstream (NIT = Network Information Table). The NIT also contains info about the transponders TV and Radio-channels. The unit has a built in DVBS-receiver which can store up to 100 Free To Air channels in a favourite channel-list. SATLOOK HD COLOR can handle a lot of memory-positions and both spectrum-pictures and certain frequencies can be saved (both analog and digital transponders). The power of the instrument is supplied by a built in and rechargeable battery. The instrument is provided with a 5” color 16:9 LCD-monitor. Menus/help-displays are shown on the LCD screen (64x128) beside the monito

Features:

• MER readout
• Spectrum-analyzer 950-2150MHz
• DVB/S S/2 -receiver 920-2150MHz
• Super bright 5” 16:9 TFT-LCD color display
• Automatic Satellite identification
• Readout of NIT- gives SATID and TV/Radio-channel info
• Digital BER and S/N-ratio (DVB-S, S/2)
• QPSK and 8PSK constellation diagram
• DVB-S (Free to Air) and SAT-analog TV-picture
• LNB voltage 13/18V, 22KHztone switch
• DiSEqC according to level 1.0, 1.1 and 1.2
• SatCr-control (UniCable)
• Favourite channel list (100 channels) for FTA DVB-S
• Lots of memory positionsforspectrum pictures
• RS232 for PC-connection (up/download)
• Rechargeable Li-Ion battery

Technical Specifications:

• Input frequency: 920-2150MHz
• Sat-TV min level in: About 35 dBuV (noise)
• Sat-TV max level in: About 90 dBuV
• Sat-TV attenuation: 15 dB attenuator on/off
• Display of signal level (analog): dB on LCD/monitor. Pitch-tone.
• Sat-TV accuracy: ±1½ dB (at +20° C)
• DVB-S S/2 Digital display of signal level: S/N (signal/noise-ratio) BER (bit error rate) Constellation (QPSK and 8PSK)
• Satellite-indentification: Yes, by reading out the NIT in the Bitstream. Info about the TV and Radio channels
• TV standard: MultiTV/ (PAL, NTSC, SECAM)
• KU- C-band: Yes, selectable
• Input impedance: 75 Ohm, BNC-con
• Picture-screen: 5” 16:9 TFT-LCD monitor
• Menus: On LCD 64x128
• Memory: -Lots of spectrum pictures can be stored with name. Stored spectrum can be mixed for easy identification of satellite. -“Maxhold”-function
• Favourite channels: Both analog and digital frequencies can be stored (with name). 100 DVB-S Free to Air channels can be stored in a favourite channel-list
• PC-connection: RS232-output and PC-software
• Sat-TV power out: Yes, 13-18V
• Sat-TV control: 22 kHz, DiSEqC SatCr (UniCable)
• DiSEqC: Yes, all 1.0 and 1.1. 1.2,Toneburst on/off
• DiSEqC actuator: Built in positioner for DiSEqC 1.2
• Battery: Rechargable 12v, 3.5 amp/hour
• Weight: About 4 kg incl. battery
• Accessories: Nylon carrying-case. Power-supply of 220v/13.5v, 1.7amp. Car-charger, F-adapters

Downloads: